Vax Turbo Force V-060P Spezifikationen PDF herunterladen (Seite 18)

Testing flow rate after adjustment

1. Observe oil drip rate in oil view meter or oil line to

ensure adequate lubrication.

2. Adjustments should be done gradually so as not to

starve the vacuum pump of oil.

Recommended lubrication

We recommend that turbine grade oil be used in all our pumps. Turbine oil is

more highly refined than motor oil and is much less likely to create carbon.

Turbine oil is available from your local oil distributor. Below is a list of accept-

able oils.

• Penzoil Penzabell 68 T.O.

• Shell Turbo 68

• Mobil D.T.E. Heavy – Medium

• Texaco Regal R.N.O. 68

Normal operation for air cooled pumps:

1. Check oil reservoir daily and fill as required.

2. When pump is in operation check oiler to insure flow

of oil to pump.

3. Do not operate pump faster than recommended RPM.

4. To operate suction valve on top of pump, move

handle in the appropriate direction for either vacuum

or pressure; center it for neutral.

5. We recommend checking vane wear every twelve

months. A new vane is nearly flush with the rotor.

Measure the wear and if is over 1/4" we recommend

replacing vanes. It’s good to always keep a spare set

of vanes on hand for emergencies.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 46 47

Keine Kommentare

Vax Turbo Force V-060P Spezifikationen Seite 18