Vax 4000 Model 200 Wartungshandbuch PDF herunterladen (Seite 75)

5. Feed the socket end of the cable under the system from the back or side,

and insert the cable into the power supply as shown in Figure 46.

Figure 46: Attaching the Power Cable to the System

MLO-005577

Feed Cable Under System

and Through Opening

To Outlet

6. Insert the plug end of the cable into your wall outlet or other power

source.

You are now ready to turn on your system and select a language.

13 Turn On the System and Select a Language

The language you select controls only the language of the console program

which is part of the ﬁrmware in the CPU. That ﬁrmware lets you give

commands to the system and also generates error messages.

NOTE: For a dual-host system: You must turn on each host separately. If

you want a language other than English (United States/Canada), you must

select a language for each host.

Turn on your system(s) and select a language for each as follows.

66 VAX 4000 Model 200 (BA430) Installation

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 97 98

Keine Kommentare

Vax 4000 Model 200 Wartungshandbuch Seite 75