Vax 4000 Model 200 Wartungshandbuch Seite 61

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 98
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 60
2. Connect the DSSI cable (BC21M–09) to the DSSI In/Out connector by
fitting the cable connector over the two guide pins.
Figure 33: Connecting the DSSI Cable
MLO-004240
Tighten the cable connector screws by hand, then use a screwdriver to
secure the connection.
3. If applicable, install the terminator (removed in step 1) on the expander
as shown in the expander installation document.
8.3 Connecting the KZQSA External Cable
1. Open the bail latches and remove the terminator (12–30552–01) from
the lower connector on the KZQSA module (M5976–SA).
52 VAX 4000 Model 200 (BA430) Installation
Seitenansicht 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 97 98

Kommentare zu diesen Handbüchern

Keine Kommentare