Vax Rapide XL Betriebsanweisung PDF herunterladen (Seite 16)

o install a ne

w br

ushbar

. Feed the

ushbar through the opening until

the screw plate and screw hole are

lined up (as above).

Note: The b

lack cap behind the

silver screw plate will be through the

hole.

Tilt cleaner off the car

pet.

asp

the br

ush bar and pull the r

ight side

of its chamber.

Tilt the brushbar down to the

ground and remove the silver cap.

Slide the worn brushbar out of the

cleaner.

Replace the silv

er cap to r

ight side

of the brushbar. Lift the brushbar up

and align with the brushbar

chamber

. Push the screw plate

towards the screw hole until the

flush and replace the scre

3 4

Remove the screw that holds the

brushbar in place.

Brush removal and

replacement

1. Loop the belt around the rear shaft.

2. Loop the top of the belt above the small

pulley and the bottom of the belt around the

lower small pulley.

3. Feed the entire belt over the first large

pulley.

4. Loop the belt around the front large pulley

and rotate the front brushbar forward until

the belt is in place.

Note: Make sure the entire belt stays on top of

the first large pulley by lightly placing a finder

on top to guide it.

Return the nozzle cover to the

original position.

ecure by replacing the two (2)

screws.

V027(Y) User Guide 5/10/06 11:47 am Page 16

1 2 ... 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Vax Rapide XL Betriebsanweisung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Staubsauger Vax Rapide XL