Vax Careline:0870 6061248Please read carefully before using this cleaner. Always fully extend the mains cable before use.www.vax.co.ukBAGLESS UPRIGHT
2. Undo the hose from the back panel dirt tube.Remove any obstruction (Fig.9/2).3. Undo the hose from the clear dirt passagewindow and remove any obst
2. Pivot lowering housing and remove anyblockage (Fig.9/6).3. To re-assemble, ensure that the tabs areengaged. Pivot the lower housing closed androtat
Troubleshooting1210. TroubleshootingWARNING: TO REDUCE RISK OF PERSONAL INJURY, UNPLUG VACUUM CLEANER BEFORESERVICINGPROBLEM: Cleaner won’t runCause:
Troubleshooting/UK Service & Help/Technical Specification1312. Technical SpecificationVoltage: 230-240V ~50HzWattage: 1500-1900W (dependent on mo
This page has been intentionally left blank.14Vax V-006 D5 BF 7/1/05 12:13 PM Page 14
This page has been intentionally left blank.15Vax V-006 D5 BF 7/1/05 12:13 PM Page 15
EEC STATEMENT OF COMPLIANCEManufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that theV-006 series Bagless Upright Vacu
1 Cable clip2 TurboTool®3 Dirt container release latch4 Dirt container lid5 Hose tube6 Lower hose 7 Lower hose cuff8 Clear dirt path window9 Handle1
Safety Information32. Safety InformationFOR HOUSEHOLD USE ONLY. When using the vacuum cleaner, basic safetyprecautions should always be observed, incl
3. How to AssembleIMPORTANT: Always remove the power plug fromthe electrical outlet before assembling or beforeremoving accessories.Tool required: Ph
512. Attach the tools. Slide the dusting brush onto thepost in the upper tool caddy with the bristlesfacing out (Fig.3/12A). Slide the extensiontube/c
15. To secure the dirt container push the top in place,there will be an audible click when it is secure(Fig.3/15).4. How to OperateCord ReleaseRelease
5. AccessoriesIMPORTANT: The vacuum cleaner must be in theupright position to raise the brushbar. The brushbarheight adjust must also be at its highes
2. Remove the dirt container lid by turning it anti-clockwise (Fig.6/2).3. Hold the dirt container and grasp the top of thefilter. Twist and pull the
2. Lift the nozzle guard (Fig.7/2).3. Lift and remove the brushbar and dispose of thebelt (Fig.7/3).To Replace the Belt or Brushbar1. Slide the belt
Kommentare zu diesen Handbüchern