Vax 4000 Model 200 Wartungshandbuch PDF herunterladen (Seite 12)

Chapter 2

Troubleshooting During Normal

Operation

Problems that occur during normal operation of your system may result

from a problem in the system, faulty settings, or incorrect procedures.

The following sections list problems, possible causes, and corrective actions.

If the action(s) listed do not solve the problem, call your Digital service

representative.

NOTE: In the following sections, the names of controls and indicators on

BA215 enclosures, when different from those on BA400-series enclosures, are

italicized and enclosed in parentheses.

2.1 System Problems

Problem Possible Cause Corrective Action

DC OK indicator lit; noth-

ing displays on console

terminal; LED on con-

sole module cover panel

displays E or F.

Problem with CPU. Call your Digital service representa-

tive.

System loses power; AC

Present indicator (BA215:

Power switch) not lit.

Plug loosened. Set Power switch to 0. Plug in system.

Set Power switch to 1.

No power at wall outlet. Use different wall outlet or check

circuit breaker controlling power to

wall outlet.

Power switch (BA215:

Circuit breaker) tripped.

Wait 1 minute, then set Power switch

to 1. (BA215: Set Power switch to

0, push Reset button, wait 1 minute,

and set Power switch to 1.) If

problem persists, call your Digital

service representative.

Troubleshooting During Normal Operation 2–1

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 45 46

Keine Kommentare

Vax 4000 Model 200 Wartungshandbuch Seite 12